ERCO rivet applications

Engineering and Research Corporation, more commonly known as ERCO was founded in 1936 by Henry Berlinger. The ERCO company was founded to be a large producer and manufacturer of tools that are able to build metal aircraft machines as well as air craft propellers. ERCO is able to produce everything from riveters, to tooling for riveters, engineered rivet applications, portable model riveters, automatic punch riveter, shrinkers, jaw services and tooling for shrinkers.

Automatic punch riveter
These are tools that are absolutely ingenious and it takes the need for two different tools for hole punching and press dimpling into one single tool saving you time and money. Rivet tools can be used by one operator in just a single place with almost total safety so you do not have to split shifts of the work or go between different people to punch and rivet.

These two in one functions are just basic functions for the automatic riveter on all three of the models with the biggest difference between each automatic punch riveter are the dimensions of the throats. They are all pneumatically powered and electrically-controlled and has a foot pedal that is either combination controlled, fully automatic, or two-pedals. They are all made to be as easy and efficient as possible for the operator. It can also come in a portable model so that you can take it with you on projects far away or have the ability to move it when you are working on a large project that calls for you to move around a lot.

Capacity for engineered rivet applications
Riveters have a huge capacity to take on just about any project that you put it through. It has a material tensile strength of approximately 65,000 pounds per square inch and can bare up to 10,000 p.s.i. at one time. It also has a maximum combined material thickness of 1/8″ and has 1000 countersunk head solid rivets.
When you look at the throat of the riveter you will see that going from the center of the punch and measuring to the machine frame is going to be 3 and 1/4″ while the top of the stripper to the top of the stripper arm measures 11/16″ and 3/8″ between the punch and the die.

How much does the automatic riveter weigh
Most operators want to know how heavy the riveter is so that they can know how easy it will be to move it around and work with it, and if the portable function will really be as easy to move as advertised. the punch riveter weighs a total of 28 1/4 pounds, the bench mounting bracket is 8 and 1/4 pounds, and the remote control to turn it on and off and control the speed is about 4 pounds.

The automatic riveter requires 90-100 p.s.i. of lubricated air to operate it. Once you get it going and learn how to use it, it can make 30 rivets per minute in automatic mode and 20 rivets per minute in semi-automatic m

Erco Metal Former Uses

Erco Metal Former Uses
For anyone who has worked with fabricated metal knows the importance of a sheet metal former. With so many brands in the market, it is easy to get spoilt for choice. The erco-metal sheet former has been in the industry for a long time and can be trusted to deliver on the work needed. In knowing what exactly it does, you will know whether this is the right one for you. Please make sure you get it from a reputable dealer also to get a warranty for it and after purchase services. If you had no idea that the erco sheet metal former is still in use, then here are its various uses.

Forming Bends

You can use the metal former to make plain, return bends and offset the large flared radius and half-round flanges on metal curved or straight edges.

Flanging Edges

If you have circular discs, you can form internal and external edges on them. However, this is only possible if the opening is more than 6 inches.

Forming Flanges on Cylinder End

The erco-metal sheet former can create external flanges on the ends of cylinders and crowned sheet metal with a 4 inches and bigger radii curves. It can also be used on internal flanges with a radius of 5 inches or bigger.

Works on Soft and Semi-Hard Metals

The erco-steel metal former also works on soft and semi-hard metals like steel, brass, and aluminum. It also works in alloys of aluminum and Monel metal. This comes in handy because this material makes working on them by hand very expensive, and the production cot will be so expensive, especially power cost and die equipment.

Eliminates the Need for Expensive Add-Ons

If you have worked with other metal formers, you will know that there is the extra cost to get dyes for them to work. This is not the case with the erco-metal former. The equipment comes with its add-ons, which makes it cheaper and convenient to use.

It Has an Infinite Radius and Angle Control

This particular model comes with the ability to form flanges and edges of various height and shapes. It can work with different shapes, heights, and thicknesses if sheet metals. It is limited by the metal’s thickness and material, which can be seen in the bend tables.

The good thing with this metal former is the ease of use. You do not need a lot of experience to work it. On buying it, you get a manual that will help you work your way around it. Before you get started using it, ensure you have all the parts fixed together in the right way and that they are all working well. Take your time to test out the different procedures on smaller pieces of metal before working on the actual project. This will help you get a feel of how the machine works and what you need to adjust. Checkout SALFORM for more informtion.

Erco Tooling for Formers

The High Performance Industrial Machines are the innovation in modern technology. It shows us the great manipulation of tools for the market operational machines. The two primary components of needs are sheet metal flanger and sheet metal former. These advance technology is necessary in a world of opportunities. It is the best innovation that offers the best quality, accuracy and performance and the best quality for difficult tasks.

The devises provided given to those who needs a guaranteed quality of user control. For the use of the machines each particular instruction is to operate with accuracy and safety. These machines are classified to offer strong and successful performance to operate at a highest speed to the difference of others. Sheet metal shrinking and stretching machine is use in particular for the aircraft industry on aluminum parts which provides efficiency. One conventional detail is to conserve time with d-wrinkling and hammering.  The Forming and Flanging machine, this innovative machine has the capacity and ability to form flanger edge of certain heights and shapes. Computer Controlled tapping machines provides as well a reliable mechanical device which give a faster and flexible electronic advance in any operational task. It finds the facility to engage in other task during the process of its work. This machine is an advance technology which produce a countable amount per hour.

According to modern manufacture technology these machines offers the great accessibility to work in environments that lack productivity, flexibility and accuracy. It is the best investment for the workforce of professionals that wants the best quality of operations.

Erco sheet metal former and flanger: Efficient and quality results!

An efficient machine for the job

The Erco machine is the next innovation of the future of sheet metal manipulation tools on the market today. The two primary functions of this device constitutes a sheet metal flanger and sheet metal former for the details needed for the job. Where hand production quality lacks, this machine can compensate and perform otherwise impossible tasks with precision and accuracy. This device gives the user absolute control over the radius and bending preferences that may be more demanding in today’s evolving world. While operating the machine, it’s important to utilize the careful instructions for each particular job and operate with safety.

Features of the Erco Model

This Erco machine features a sheet metal former that can bend and form the sheet steel metal into whatever necessary for every application. It can form plain, half round flanges on straight edges and curves of sheet metal. The machine functions remarkably well as a sheet metal flanger that can fix the irregular contour of anything, and utilizes advanced motion to properly shape metals of all types. It is strong and efficient in its approach, and operates at a higher speed than other units. Sometimes it requires the sheet to go through multiple times for absolute precision in special circumstances.

Functionality and applications

This machine helps to grip the metal on the anvil during the important brake head stroke, and serves as a form to which the project is then completed. This is important to because accuracy is what makes a better final product. Stability is a very crucial aspect to these delicate processes. This machine can work on hard or soft types of metal, and is suited for any job with precision. It features a quick release that will free work from the anvil to assess. We have great confidence in this reliable machine, and it has proven to show promising results in the field. It eliminates the use of expensive tedious dyes and In-edge forming and flanging. There is a remarkably versatile design that allows for infinite radius and angle controls for the especially demanding projects that require special attention.

Operational guide for proper use

It’s important when operating to follow the instructions because this device is definitely not a toy. We suggest reading the instructions and reference the manual with visual aid to ensure proper usage of the device. When used properly, the machine has great potential to conquer the toughest demand on sheet metal flanging and forming. This science is growing more as things advance, and surely this will add a necessary flare to any workspace. Purchase the device now to add precision and reliability to the toolbox. We forge our products with the greatest care, and ensure customer satisfaction to the max! The brake plate tool helps to attain control over the whole project, and a hand crank mechanism helps any professional form the desired angles. Everything is needed to operate effectively with ease and comfort!


What can ERCO Sheet Metal Formers be used for?

Machines for Metal Working

Metal working is vital for building structures. The aerospace industry, in particular, is broad and it involves different aspects of building, designing, testing, selling, and maintaining aircraft parts, aircraft, rockets, missiles, or spacecraft. Because of this, it is important for us to use the proper machines to form and stretch sheet metal.

At SalForm, we sell ERCO Sheet Metal Formers specifically designed for forming, flanging, shrinking, and stretching sheet metal. There are two types of ERCO Sheet Metal Formers: shrinkers & stretchers and flangers.

The ECRO Model HD Sheet Metal Former and Flanger

Also called flangers, can form flange or edge of particular heights and shapes on many different kinds and thicknesses of sheet metals. The lowest radial limit of the curved edge and highest height level of the flange that is formed is only limited by the thickness of the material and height of the flange. This machine includes infinite radius and angle control and eliminates expensive dies and in edge flanging and forming.

The forming and flanging machine is a self-contained unit. Both drive motor and operating mechanism are placed below the work level. Supporting the sheet metal is a flat table that passes the metal through the working head. Both the hold-down tool and the brake plate tool along with the anvil are set up and arranged on a solid frame.

Sheet Metal Shrinking and Stretching Machine

Also called shrinkers & stretchers, this machine was originally designed and developed to be used in the aircraft industry on aluminum parts. This machine is used extensively because of its convenient abilities. It can eliminate wrinkles as it fits sections that are formed normally in presses or drop hammers. It can generate double curvatures from flat sheets.

There are three different models. One is called Model 1447-120T which is a 12-inch throat foot-operated machine.

The other model is called the 1447-60T and it is now widely used and available to the whole metal working industry. This model is ideally used for prototype work and short production runs because it requires less floor space in manufacturing areas. The operation is simple and can only take a few minutes for the operator to be familiar with everything.

And lastly, the TGE-ERGO Model 312BOT which is a power shrinker/stretcher. This is used for longer production runs and is far more effective.

This model can be used more efficiently with most metals because it incorporates both shrinking and stretching capabilities into one machine. It is very beneficial because of its efficiency in metal shrinking and stretching. It eliminates the need for manually de-wrinkling and hammering operations which can be time-consuming. It defeats the need